door locks
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132252
Printed Date: May 15, 2025 at 5:03 AM
Topic: door locks
Posted By: partypeepers
Subject: door locks
Date Posted: September 24, 2012 at 12:22 PM
hELLO I was wondering if anyone knew what relay diagram i should use if im going to be adding aftermarket power door locks and i want to add a switch and also connect it to my keyless entry, (alarm) the alarm has a (-) polarity output so the connections should be for (-) polarity, thank you
-------------
cesara
Replies:
Posted By: i am an idiot
Date Posted: September 24, 2012 at 1:09 PM
Posted By: partypeepers
Date Posted: September 24, 2012 at 1:14 PM
Which one would it be? I tried the 5 wire diagram but nothing happens .
-------------
cesara
Posted By: i am an idiot
Date Posted: September 24, 2012 at 2:07 PM
That link should take you directly to the one you need. It is labeled Actuators / Reverse Polarity.
Posted By: partypeepers
Date Posted: September 24, 2012 at 2:26 PM
Ok found it. but what if I want to add a switch to this diagram? Do I piggy back the wires going to the alarm lock and unlock?
-------------
cesara
Posted By: howie ll
Date Posted: September 25, 2012 at 12:51 AM
Yes.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: offroadzj
Date Posted: September 25, 2012 at 6:14 PM
To lock / unlock by a switch just connect one side of each switch to ground, and the other to the lock / unlock inputs (alarm connections)
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
|