dei528t
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132379
Printed Date: May 15, 2025 at 11:37 AM
Topic: dei528t
Posted By: redfar
Subject: dei528t
Date Posted: October 14, 2012 at 9:21 AM
hello,
Today I tried to connect the 528t timer relay.
I am going to use it for the front parking sensors,When I hit the brake it will activate the parking sensors for 30 secends and then switch off automatically.
I connect the relay,
Red + Battery
Black - Battery
BLACK/ white to activate the relay.
The relay is activated when I put negative in the BLACK/ white wire,but which are the out put wires?
Orange red or brown?
Can I activate the relay with positive?Because it only activate with negative input?
Thanks
Replies:
Posted By: howie ll
Date Posted: October 14, 2012 at 11:25 AM
POS in on brown and out to rev aid on yellow.
Ignore Orange.
Yes cut the blue lop for POS input on the BLACK/ white.
All of the above is in the instructions, you could have looked and saved a post!
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|