Print Page | Close Window

dei 528t with relay harness

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=132804
Printed Date: May 16, 2024 at 4:02 PM


Topic: dei 528t with relay harness

Posted By: drewy1322
Subject: dei 528t with relay harness
Date Posted: November 27, 2012 at 12:03 PM

I would like to wire the DEI 528T to my low beam HID's to create a delay on (10 seconds) and need to know if I need to add an additional SPDT relay if I already have a relay harness on my HID's? It seems not needed to add another SPDT relay although I could be mistaken. Thanks for your help!



Replies:

Posted By: howie ll
Date Posted: November 27, 2012 at 6:33 PM
Not needed. The 528t has more than enough current handling capacity.
Break the low beam feed inside the vehicle.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: drewy1322
Date Posted: November 27, 2012 at 7:36 PM
Now to figure out which wire inside the vehicle. I know the wire in the engine bay but I am assuming the 528T is not waterproof.

posted_image




Posted By: howie ll
Date Posted: November 28, 2012 at 1:26 AM
Hence "break the feed inside the vehicle".
What vehicle?

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: drewy1322
Date Posted: November 28, 2012 at 10:56 AM
2001 Olds Aurora V8 4.0L




Posted By: howie ll
Date Posted: November 28, 2012 at 11:05 AM
Can't help you with that one but the wire should be either in the steering column loom or at the light switch. TEST.
Damn! Audi, BMW, M/Benz or VW, dead easy, either yellow/XXX or WHITE/ XXX!

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window