24v winch reversing

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138023
Printed Date: May 02, 2025 at 8:07 AM

Topic: 24v winch reversing

Posted By: bigmark64
Subject: 24v winch reversing
Date Posted: December 22, 2014 at 4:23 PM

Hi I have just fitted a 3000lb 24v winch to my trailer to haul up my toro mower. I require a reverse polarity relay diagram for 24v system using common automotive relays that are available In australia. The winch is only used for short periods and average loads. Any help appreciated.

Replies:

Posted By: howie ll
Date Posted: December 23, 2014 at 1:32 AM

Go to the relay section, look for locking, 5 wire it's essentially what you need.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: hotwaterwizard
Date Posted: March 29, 2015 at 6:59 PM

posted_image You could use a switch or 2 standard 24 volt relays .

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Print Page | Close Window