Push button starter switch with a relay
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139396
Printed Date: May 05, 2024 at 1:15 AM
Topic: Push button starter switch with a relay
Posted By: uponashelf
Subject: Push button starter switch with a relay
Date Posted: September 05, 2015 at 2:37 PM
Looking to install a push button start on my riding mower with a relay so I can use a basic push button instead of an actual starter or horn push button. I figured I could use the wiring at the starter solenoid. I want the relay because the push button I want to used won't handle the voltage or amperage. I will still be using the key switch to turn the mower off, so in the on position the push button will start the mower. So any help would be greatly appreciated
Replies:
Posted By: howie ll
Date Posted: September 06, 2015 at 6:25 PM
Neg to push button then
push button to 85
IGN to 86
20amp constant (use ignition switch feed) to 87
30 to solenoid.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|