Ignore 1st Flash, 2nd flash output

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139558
Printed Date: May 13, 2025 at 11:42 AM

Topic: Ignore 1st Flash, 2nd flash output

Posted By: yamajason
Subject: Ignore 1st Flash, 2nd flash output
Date Posted: October 11, 2015 at 9:42 PM

I have a Directed 2102T that I want the Unlock Remote button to activate a 12v strobe light to help find car in HUGE parking lots.

Since there is not any additional outputs, I want to use the Parking Light Flash output to activate a 528T Pulse Timer Relay to power strobe light.

1 Flash for lock
2 Flash for Unlock

I need the Pulse Timer Relay to Ignore the 1st Flash (If I lock car) and only activate on the 2nd pulse/flash.

What do you think?

Replies:

Posted By: i am an idiot
Date Posted: October 11, 2015 at 10:24 PM

Do you really want to unlock it if you do not know where it is?

Posted By: yamajason
Date Posted: October 11, 2015 at 10:48 PM

I can always push the lock button afterwards....just trying to keep it simple

Print Page | Close Window