Momentary switch with relay?
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139846
Printed Date: April 30, 2024 at 7:52 AM
Topic: Momentary switch with relay?
Posted By: jerrad
Subject: Momentary switch with relay?
Date Posted: December 04, 2015 at 1:40 PM
Good afternoon everyone,
I'm installing an electric exhaust cut out and I'm trying to wire in a different on/off/on momentary switch. People are saying that I need to use 2 5 pin relays to accomplish this, they also suggest that I use the "universal reverse on ground". Here is a schematic that I've found: https://honda-tech.com/attachments/audio-security-video-27/271136-help-installing-remote-start-alarm-keyless-entry-actuatorrevpol.gif
Here is the motor that I'm trying to control: https://m.summitracing.com/parts/qtp-qtec30cp?seid=srese1&gclid=CJf79M76wskCFRCqaQodDicPyQ
Any help would be greatly appreciated.
Jerrad
|