Solid Halos/Flashing Halos
Printed From: the12volt.comForum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142901
Printed Date: May 03, 2025 at 12:11 AM
Topic: Solid Halos/Flashing Halos
Posted By: tangoalpha10224
Subject: Solid Halos/Flashing Halos
Date Posted: April 24, 2017 at 7:07 AM
I have replaced the OEM headlamps to a set of aftermarket HALO/Projection Headlamps. The vehicle does NOT have DRL, and is running a constant 12V (2004 4Runner). The goal I am striving for is for the HALOs to be illuminated when the car is on, and flash in sequence with the turn indicators. I found the wiring of "pulsed to constant" and have incorporated that into my schematic, but here is the challenge. I have very minimal electrical knowledge and I need to know the Values of the resistor/capacitors so I can order the right ones.
Many Thanks in advance!!
-------------
Retired Navy Chief
Many Thanks in advance!!
-------------
Retired Navy Chief