Momentary Ground - Positive Output

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143041
Printed Date: April 27, 2024 at 9:43 AM

Topic: Momentary Ground - Positive Output

Posted By: ewingr
Subject: Momentary Ground - Positive Output
Date Posted: June 09, 2017 at 12:16 PM

I had to ask such a simple question, but I went over to the diagrams to look, but I guess I'm not familiar with the terminology enough to be sure any of those are what I want to accomplish.

I simply want to press a button that will supply a ground to a relay which will then trigger the relay to send positive out to a trunk solenoid.

I really would appreciate it if someone could tell me the correct wiring plan for a relay to accomplish this.

Thanks...

-------------
Thanks
Roger

Replies:

Posted By: ewingr
Date Posted: June 09, 2017 at 12:22 PM

I did some more searching, and I think the one on the left at This page will do the job.

I'll keep an eye here in case someone tells me that is wrong.

-------------
Thanks
Roger

Posted By: wirewise
Date Posted: June 10, 2017 at 12:17 PM

That's the one you want to use.

-------------
~wirewise~ Verify all wiring with your meter before making any connections!

Posted By: ewingr
Date Posted: June 10, 2017 at 2:21 PM

Thank you...

-------------
Thanks
Roger

Print Page | Close Window