Wiring in Hazard lights

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143833
Printed Date: April 28, 2024 at 9:10 PM

Topic: Wiring in Hazard lights

Posted By: dr1v3on3
Subject: Wiring in Hazard lights
Date Posted: November 30, 2017 at 4:34 PM

I am currently trying to wire in my hazard lights. I am using a new switch that is a momentary switch and the old one is a push button switch. Is there a way to make the new switch work other than using multiple relays to make a latching system. Also I am having trouble finding a latching relay that would work. The switch is controlled by a ground.

Replies:

Posted By: i am an idiot
Date Posted: November 30, 2017 at 6:05 PM

https://www.the12volt.com/relays/relaydiagram23.html

Posted By: dr1v3on3
Date Posted: November 30, 2017 at 8:55 PM

I was wondering if there was a way to do it without adding 4 relays. Is there a single latching relay that would work?

Posted By: dr1v3on3
Date Posted: December 05, 2017 at 9:01 AM

The switch is controlled by a momentary ground. But I need to output to also be a ground is that possible?

Print Page | Close Window