Print Page | Close Window

Help with Lighting Design

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14444
Printed Date: May 28, 2025 at 1:20 PM


Topic: Help with Lighting Design

Posted By: Carbonman
Subject: Help with Lighting Design
Date Posted: June 04, 2003 at 10:09 AM

Hello,

may be a bit much to ask, but is there any way someone could do a mock-up wire schematic of the following lighting system I have in mind. Or even some suggestions on howmany relays and such I'd need to get. I can do the actual schematic but need some suggestions on what items I'd need to include

I want to centralize it with one direct power in off the battery and have only one Switch for "lighting", I might at a later date include a pulse module, but not just yet

I will have four sections of two Blue LED's (8total) in my Sub Box illuminating through two Plexi windows

underbody kit wired to this switch, aswell as my HL Halos (12V requirement), Aftermarket Foglights, and two interior Neon tubes (12in length)

Am I just shootin at stars here to get everything from one switch? thanks for the help guys




Replies:

Posted By: BumpNGlow
Date Posted: June 05, 2003 at 2:36 PM
so you want a giant kill switch?



Posted By: xetmes
Date Posted: June 05, 2003 at 3:30 PM
is that what you want just a giant kill switch? you could just look for a switch rated at the current you plan on drawing, or wire multiple relays in parallel if needed.



Posted By: Carbonman
Date Posted: June 06, 2003 at 10:10 PM

yeah, I guess you would call it a giant kill switch.

Although I really wasn't thinking of it like that. I just don't want like more than three switches to flick everytime I want some ricearoni posted_image


Print Page | Close Window