remote lead Relay
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14616
Printed Date: May 27, 2025 at 12:26 PM
Topic: remote lead Relay
Posted By: Sebastian018
Subject: remote lead Relay
Date Posted: June 08, 2003 at 2:32 PM
HI, I need to know how to hook up the relay to connect the Remote lead to three amplifiers,?
thank you
Replies:
Posted By: Velocity Motors
Date Posted: June 08, 2003 at 2:56 PM
Use this digram for multiple remote amp leads: Positive to Positive Relay Diagram------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ivanp2
Date Posted: June 11, 2003 at 3:11 PM
I was wondering the same thing. So how do you actually use this. I understand the diagram, but how do you run this out to multiple amplifiers?
Posted By: xetmes
Date Posted: June 11, 2003 at 3:45 PM
hook the remote output of the headunit to the relay ciol, the other to ground (85, 86). then hook up a good fused 12 V source to pin 30, then hool up all the remote inputs on the amps to 87 of the relay, yes hook them all up to this one pin, it will then be able to handle the current load.
Posted By: ivanp2
Date Posted: June 11, 2003 at 3:47 PM
Thanks for the info.
Posted By: Sebastian018
Date Posted: June 14, 2003 at 7:35 PM
you know I was told to do it this way
85= Remote from the head unit (usually Blue)
87= Constant Fused 12+
86= Ground
30= all the remote inputs on the amps
I dont know If its right. I planning to do it tomorrow....
Let me know thank you
Posted By: xetmes
Date Posted: June 15, 2003 at 7:55 AM
yea that will work. 
Posted By: Sebastian018
Date Posted: June 15, 2003 at 7:59 AM
ok, thank you
|