Multiple Inputs and Outputs, Emergency Lighting
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147146
Printed Date: April 24, 2024 at 7:25 PM
Topic: Multiple Inputs and Outputs, Emergency Lighting
Posted By: covingtont
Subject: Multiple Inputs and Outputs, Emergency Lighting
Date Posted: November 22, 2021 at 6:01 AM
Hello. This question is regarding emergency lighting.
I have a light that steady burns at 12v direct power, and a flasher module that makes them flash.
I am needing one input to bypass the flasher and steady burn the light. Another input would activate the flasher on the same LED.
I have tried diodes but did not like how warm they got.
We have vehicles that have the same setup and use three relays, but not sure of the wiring that was done to make this work without back feeding with different inputs.
Any help is much appreciated!
Replies:
Posted By: i am an idiot
Date Posted: November 22, 2021 at 2:10 PM
Post a diagram of what you have with the diodes that are heating up.
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
|