Dual Relay Setup DC Hydraulic Pump

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147608
Printed Date: May 02, 2025 at 9:36 AM

Topic: Dual Relay Setup DC Hydraulic Pump

Posted By: mncountrydoc
Subject: Dual Relay Setup DC Hydraulic Pump
Date Posted: February 28, 2023 at 8:24 PM

Hello. I have a Kawasaki mule with a electric over hydraulic dump bed. Father in law pulled the relays since one was bad and didn’t write where wires went, confusing to me is each of the 2 relays had 2 pins that were grounded. Also it has a 3 way switch for up and down, trying to figure out what pins I need to wire to what. I have battery power 2 wires. 4 ground plugs. 2 wires from switch and 2 wires from pump

Replies:

Posted By: i am an idiot
Date Posted: March 02, 2023 at 10:05 PM

https://www.the12volt.com/relays/relaydiagram4.html
https://www.the12volt.com/relays/relaydiagram48.html
https://www.the12volt.com/relays/relaydiagram49.html

One of the above links should be what you need.

-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

Print Page | Close Window