Turn Signal Output To Steady Output To Trigger RV Camera
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=148250
Printed Date: May 01, 2025 at 7:01 AM
Topic: Turn Signal Output To Steady Output To Trigger RV Camera
Posted By: steveuk
Subject: Turn Signal Output To Steady Output To Trigger RV Camera
Date Posted: January 03, 2025 at 4:49 AM
Hello from the UK. Happy New Year to all.
I am looking for solution to allow a turn signal to act as a trigger for a RV (Caravan) Camera system, when activated, will switch to that camera. The camera has an input for this signal. I believe Relay 59 will provide for this. I am new to electronics, though understand the logic of the circuit. Just a little confused on the parts needed to make this up. Can anyone help list the recommended parts, from the relay (with diode built in), to Capacitor, diode and resistor. Many thanks Steve
-------------
Steve UK
Replies:
Posted By: i am an idiot
Date Posted: January 03, 2025 at 7:08 PM
Parts list for diagram #59
The 2 diodes are 1n400x x = any number between and including 1 and 7
The resistor is 10,000 or 10K ohms.
The capacitor is 10,000 microfarad in a voltage of at least 25 volts.
-------------
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Posted By: steveuk
Date Posted: January 10, 2025 at 7:27 AM
Thank you
-------------
Steve UK
|