relay problem with 2 starter wires
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16909
Printed Date: May 17, 2024 at 9:53 PM
Topic: relay problem with 2 starter wires
Posted By: skyline_man
Subject: relay problem with 2 starter wires
Date Posted: July 30, 2003 at 10:58 PM
I've connected my Lynx 200R to my car but my car has 2 starter wires, one wire is for the starter and the other helps the car start in cold weather. Now the problem arises when i connect a starter kill relay. Because i have to connect both of the starter wire from my car to the purple starter output wire of the lynx so that i can remote start the car when it's cold, but in doing that - the starter relay doesn't work. How can i overcome this problem? thank you.
Replies:
Posted By: auex
Date Posted: August 01, 2003 at 10:57 PM
Wire a separate relay to control the start assist circuit.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|