Print Page | Close Window

ignition Question

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=16948
Printed Date: July 14, 2025 at 4:00 AM


Topic: ignition Question

Posted By: thor_4_20
Subject: ignition Question
Date Posted: July 31, 2003 at 6:20 PM

i was wondering if it were possible to wire in a key-pad,with password, to the ignition. so that the car wont start until proper code is entered.  if anyone knows how this would be done, please let me know.

thanx




Replies:

Posted By: djfearny2
Date Posted: July 31, 2003 at 7:09 PM
buy a kkeypad starter kill setup available from almost all alarm companies it requires the starter wire a constant. ignition wire and a ground.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.




Print Page | Close Window