adjustable blinker relay

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18646
Printed Date: July 14, 2025 at 2:20 PM

Topic: adjustable blinker relay

Posted By: cab211
Subject: adjustable blinker relay
Date Posted: September 08, 2003 at 1:32 AM

I have a 92 acura integra. I want to change the blinker relay so that i can speed up and slow down the blinkers on the fly. I know that i need a pot for this but i don't know what else i will need or any of the values. So if anyone could help that would be great.

Thanks

Replies:

Posted By: xetmes
Date Posted: September 08, 2003 at 5:32 AM

if you are going to put it on an electronics flasher look around the net, if you are building the whole thing, look into a 555 astable setup

Posted By: auex
Date Posted: September 08, 2003 at 8:32 AM

100k pot. Take out the resistor and wire the pot in. If you search the forums a little there is another post about this that has a link to exactly how to do this.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Print Page | Close Window