Central Door Locks
Printed From: the12volt.comForum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18805
Printed Date: July 13, 2025 at 11:14 PM
Topic: Central Door Locks
Posted By: xxmattfxx
Subject: Central Door Locks
Date Posted: September 11, 2003 at 6:17 PM
Replies:
Posted By: auex
Date Posted: September 11, 2003 at 10:18 PM
All you should have to do is wire the motors like this
Then for the alarm inputs you would wire the pulses that the drivers door actuator sends out when you lock and unlock the door manually, you can also wire a negative trigger from the alarm to these wires. If the actuators dont have extra wires for the pulses then you will have to add a switch. It isn't that hard to do. Personally I would add a switch anyways.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Then for the alarm inputs you would wire the pulses that the drivers door actuator sends out when you lock and unlock the door manually, you can also wire a negative trigger from the alarm to these wires. If the actuators dont have extra wires for the pulses then you will have to add a switch. It isn't that hard to do. Personally I would add a switch anyways.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.