illuminated entry
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21340
Printed Date: July 17, 2025 at 11:54 PM
Topic: illuminated entry
Posted By: Jar2187
Subject: illuminated entry
Date Posted: November 11, 2003 at 10:05 PM
I have a 92 Ford Explorer with an aftermarket Pursuit Alarm, the alarm dates back to 93. I want to add illuminated entry, and make my exterior lights stay on untill I start it. How would I go about doing this?
Replies:
Posted By: profuse007
Date Posted: November 11, 2003 at 11:37 PM
hmm.....let see if i can help you, sounds complicated
1-find the light wire,then cut the wire
2-relay: 85-ground when arm (starter kill wire, might need to use a diode)
86-12volt
30-input polarity of the light
87a-output of light
3-an ign wire with a relay to reverse pol to (-)output to the above 85(need a diode). this part will cut off when engine start
this is an idea i just thought of at12am, iono if it will work
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|