Print Page | Close Window

Major relay wiring help needed

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24609
Printed Date: May 14, 2024 at 3:11 PM


Topic: Major relay wiring help needed

Posted By: 7thgencivic.com
Subject: Major relay wiring help needed
Date Posted: January 14, 2004 at 10:35 PM

THis is what I have and want to do with it.

1. A Source, whether it's a neon light or whatever.
2. Manual switch to control on/off of #1
3. Remote on/off of #1 (have a 4 channel remote device with 2 leads for each channel)
4. Computer controlled relay board for on/off of #1 through computer https://www.controlanything.com/cgi-bin/miva?Merchant2/merchant.mv+Screen=PROD&Store_Code=NCD&Product_Code=R85

I want to be able to control the source with any or all of the options. So If I turn on the source with #2, I would like to be able to turn it off with #4 and turn it back on with #3 etc.

Can someone help me figure it out? If you need more info, please let me know. I need to get this figured.

Thanks,
Derek




Replies:

Posted By: Teken
Date Posted: January 15, 2004 at 8:29 AM
Everything you have stated is done via the software programming in the relay pack. Turning the unit on-off via a switch is, simply adding in a toggle switch in line with the circuit.

Regards

EVIL Teken . . .





Print Page | Close Window