I installed a set of OEM lock actuators in my 1998 Pontiac Sunfire. The donor car was a Pontiac Grand Am from around the same age. All I was able to get was the left and right actuators. The relays and switches were already gone. The actuators have two wires going to them (Blue and Black). I assume that they are reverse polarity actuators.
I plan on using an Ungo MS200 alarm for keyless entry. It has a negative pulse lock and unlock.
I wired the relays for a five wire https://www.the12volt.com/doorlocks/page3.asp#5w and the actuators / reverse polarity https://www.the12volt.com/doorlocks/page3.asp#arp
I used the actuators / reverse polarity first and as soon as I put the fuse in it blew…
I rechecked the schematic and I had everything like the schematic. So I tried the five wire, same thing…
When I unhook 87a from both relays it does nothing, when I hook them up it blows the fuses…
What do I need to do?
I don’t want to use lock switches on the car just keyless entry.
Thanks, Maddox
I installed a set of OEM lock actuators in my 1998 Pontiac Sunfire. The donor car was a Pontiac Grand Am from around the same age. All I was able to get was the left and right actuators. The relays and switches were already gone. The actuators have two wires going to them (Blue and Black). I assume that they are reverse polarity actuators.
I plan on using an Ungo MS200 alarm for keyless entry. It has a negative pulse lock and unlock.
I wired the relays for a five wire https://www.the12volt.com/doorlocks/page3.asp#5w and the actuators / reverse polarity https://www.the12volt.com/doorlocks/page3.asp#arp
I used the actuators / reverse polarity first and as soon as I put the fuse in it blew…
I rechecked the schematic and I had everything like the schematic. So I tried the five wire, same thing…
When I unhook 87a from both relays it does nothing, when I hook them up it blows the fuses…
What do I need to do?
I don’t want to use lock switches on the car just keyless entry.
Thanks, Maddox
the answer to what you want is simple, even though your posting was not. this is how ya do it.....