Ignition relays

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=27291
Printed Date: June 02, 2024 at 11:46 AM

Topic: Ignition relays

Posted By: ramit Damnit
Subject: Ignition relays
Date Posted: February 26, 2004 at 2:31 PM

im installing a crimestoppers 2011 rs remote start /alarm on my 2003 dodge ram quad cab...i have been looking at several different diagrams for this year model truck....i have come up with 4 igntion wires i need to activate

my alarm has a Ign#1 and Ign#2/Accessory2 output.....i think i have to wire Ign#1 to the ign1 only so how do i wire my Ign#2/Acc#2 output from alarm into Ign#2-4 on my truck....using relays??

Replies:

Posted By: cbag1
Date Posted: February 26, 2004 at 3:40 PM

wire your ign#1 from your alarm to your vehicle ign#1 i believe its (blue) and the ign#2 out from your alarm will be wire to relays. you need 3 relays to power up this three. acc.2 not necessary to start the vehicle.

Heres how:

wire alarm out ign.#2 to #85 in 3 relays. connect #86 to gnd. connect #87 to constant 12v and connect #30s to vehicle 2nd ign., acc.1 and acc.2.

hope it helps

Posted By: ramit Damnit
Date Posted: February 26, 2004 at 4:23 PM

thanks for the help...ill try and let ya know how it works!!

Posted By: ramit Damnit
Date Posted: February 26, 2004 at 5:58 PM

AHHHHH!!!...MY REMOTE START STILL DOESNT WORK...I HOOKED UP ALL 4 IGNITION WIRES IT SAID IT HAD AND STILL NOTHING...ANYONE KNOW ANYTHING ABOUT THESE DODGES??

2003 DODGE RAM 1500 QUAD CAB!?!?!

Print Page | Close Window