HOW CAN I

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2857
Printed Date: August 10, 2025 at 5:20 PM

Topic: HOW CAN I

Posted By: MRHANDBALL
Subject: HOW CAN I
Date Posted: August 17, 2002 at 3:22 PM

ON MY ACCORD I WAS TRYING TO MAKE MY TURN SIGNALS FLASH FROM ON TO THE OTHER WHEN I TURN MY TURN SIGNAL ON HOW CAN I DO THIS

Replies:

Posted By: sparkyssb
Date Posted: August 18, 2002 at 6:13 AM

If this is what you want: When you activate a turn signal, the normal signal flashes but you would another light to flash out of sequence with the original. (EX: When ON, the other is OFF, When OFF, the other is ON)

Then you can do the following with a 5pin relay:

1. Hook up the original (+) turn signal wire to pin 86
2. Ground pin 85
3. Hook up an always (+) wire [battery] to pin 30
4. Hook up the new (+) light wire to pin 87a

That should do it for you. Hope this helps! posted_image

Posted By: MRHANDBALL
Date Posted: August 18, 2002 at 3:27 PM

THANK YOU

I'M GONNA TRY THAT I THINK THAS EXACTLY WHAT I WANT ONCE AGAIN THANK YOU

Posted By: sparkyssb
Date Posted: August 19, 2002 at 8:50 AM

No problem! keep us updated! posted_image

Print Page | Close Window