need help on the relay and alarm

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3019
Printed Date: August 13, 2025 at 3:32 PM

Topic: need help on the relay and alarm

Posted By: vcysion
Subject: need help on the relay and alarm
Date Posted: August 23, 2002 at 2:10 PM

i know where the four main wires are (ignition, 12volt, starter, and acc) but can some one tell me how and where to cut, hook them up to the alarm by looking at the diagram of the alarm. (mostly the first set of wires on the top and the relay)

https://www.q3wholesale.com/kg880diagram.html

Replies:

Posted By: Velocity Motors
Date Posted: August 23, 2002 at 6:48 PM

Do you have a DMM or light tester ?? YOU NEED ONE . You can not install a remote starter or an alarm by just going off of what the wiring diagram says. Let us know if you do and get back to us.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: omega
Date Posted: August 24, 2002 at 3:06 PM

Also, it would help if you mentioned what vehicle it is going in so you could get the proper wire colours.

Print Page | Close Window