door actuator relays

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30618
Printed Date: May 06, 2025 at 4:58 PM

Topic: door actuator relays

Posted By: davidwp13
Subject: door actuator relays
Date Posted: April 18, 2004 at 7:05 PM

Hi I am new at this BUT I need help wiring the door lock act. from a Python 660XP it has a blue and a green wire ,I have the 524F Direct act.

PLEASE HELP

-------------
David

Replies:

Posted By: chriswallace187
Date Posted: April 18, 2004 at 11:22 PM

You can use two SPDT relays or DEI's 451M. Wire it like this: Actuators/Reverse Polarity Diagram

The blue wire is your (-) unlock output and the green wire is your (-) lock output.
Also, if you use a 451M, it should plug into the alarm brain in place of the 3-pin plug with the lock and unlock wires; in that case just ignore the 85s and 86s in the above diagram.

Posted By: cb1oss
Date Posted: May 24, 2004 at 9:44 AM

Sorry for my ignorance, but where would the "actuator" wires go? I have no idea what that is. I assume thoes wires are the brown and white ones.

Posted By: chriswallace187
Date Posted: May 24, 2004 at 7:29 PM

The actuator wires from a 451M are GREEN/ black and blue/black, and they go to the green and blue wires, respectively, on your aftermarket actuator(s). The BROWN / black and WHITE/ black wires are terminals 87a, and go to ground.

Print Page | Close Window