02 yukon dome light, will this work

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34886
Printed Date: May 22, 2024 at 9:12 PM

Topic: 02 yukon dome light, will this work

Posted By: ps1k0
Subject: 02 yukon dome light, will this work
Date Posted: June 30, 2004 at 11:59 PM

I have an 02 yukon, and i put a viper 791xv alarm in it.

the problem is, when i turn the key off, the dome light supervision kicks in and shoots power to the dome light(like it's supposed to), but it shuts off the RAP (retained accessory power) and i can't put my windows up.

I am planning on putting this relay setup in to keep the RAP going, but not turn on the dome (through alarm)when i turn the key off, but yet let the dome turn on when i disarm the alarm.

i figure this should do it, atleast it looks good on paper. mostly i wanted a second opinion b4 i went through with it. any input or modifications are more than appreciated.

posted_image

-------------
The Louder it is...
..The More I Like It!!!.

Replies:

Posted By: ps1k0
Date Posted: July 01, 2004 at 12:03 AM

seems to have not shown the pic so here it is again

posted_image

-------------
The Louder it is...
..The More I Like It!!!.

Posted By: auex
Date Posted: July 01, 2004 at 3:19 PM

You have to include the file extension.

posted_image

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: auex
Date Posted: July 01, 2004 at 3:22 PM

How about wire a relay that will cut the domelight supervision while RAP is still on? Just basically: 85 ground or ground when off(like an ignition wire or something), 86 +RAP, 30 domelight supervision input, 87A domelight supervision output.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: ps1k0
Date Posted: July 01, 2004 at 10:05 PM

ahh..

i didn't even think of that.

alot less relays used..

less bulk..

i like it..

thanks.

-------------
The Louder it is...
..The More I Like It!!!.

Posted By: auex
Date Posted: July 01, 2004 at 10:39 PM

Not a problem.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.