Print Page | Close Window

Power Window in Honda CRX

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36017
Printed Date: May 14, 2025 at 8:42 PM


Topic: Power Window in Honda CRX

Posted By: Vinguise
Subject: Power Window in Honda CRX
Date Posted: July 22, 2004 at 9:49 PM

I had my power window add on (useing two wire motors) install by a professional installer, but the close up two days after my installation. All the wire is mess up. Can someone show me how to wire the switches for the power window? I need to install one for the driver side and one for the passenger side. How do I wire up the fuses and relays? Which diagram should I use? How many wire switches should I use (four or five)?  Suppose I am starting from scratch, that the two motors are in and there are two wires per motors. Where do I go from there?



Replies:

Posted By: NSTALLER36609
Date Posted: July 22, 2004 at 10:44 PM

What brand of window kit?



-------------
MECP Certified



Posted By: Vinguise
Date Posted: July 23, 2004 at 9:47 AM
I am not sure. There is no label or marking.


Print Page | Close Window