Print Page | Close Window

Flashing lights

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42052
Printed Date: May 18, 2025 at 9:22 PM


Topic: Flashing lights

Posted By: tbirdsc
Subject: Flashing lights
Date Posted: November 01, 2004 at 4:40 PM

I hope someone can help im trying to make a single filament bulb (194) act as a dual filament bulb i need it to flash when the turn signals are on with the parking lights on or off is there any way this is possible or is there a DF bulb the same size as a 194

Thanks Brad




Replies:

Posted By: tbirdsc
Date Posted: November 04, 2004 at 9:27 PM

thanks everyone for looking

i couldn't figure it out i guess if it could be done they wouldn't have the dual filament bulbs

i installed leds for the parking lights and will use the 194 for the turn signal looks great and prolly better

Thanks

Brad




Posted By: IMAGE6902
Date Posted: November 09, 2004 at 2:40 PM
sorry i was too late to help, but i wired my foglights (single filament) with three relays so that they would work as turn signals(ON>OFF>ON)and when you turn on the parking lights, the foglights come on, turn the turnsignal on(OFF>ON>OFF) works beautifully. if you want the wiring info, let me know...

-------------
I tell it like it is...



Posted By: ff-mike
Date Posted: November 15, 2004 at 10:42 AM
Wire the 194 lamp leads to the 2 hot wires for the park& turn lamp. Do not ground this lamp. The 194 will be XORd to the park/tail lamp.

Logic Table

park     turn | 194
---------------------
off     off    | off
off     on     | on
on      off    | on
on      on     | off




Print Page | Close Window