Parallel/Series relays... in sub box?

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4237
Printed Date: July 21, 2025 at 10:31 PM

Topic: Parallel/Series relays... in sub box?

Posted By: jmoberley
Subject: Parallel/Series relays... in sub box?
Date Posted: October 06, 2002 at 5:23 PM

If I built and used the circuit on the relays page that lets me switch a DVC sub between series and parallel, could I put this inside my sub box? or would the vibrations be too much for the relays?

Jon

Replies:

Posted By: djfearny2
Date Posted: October 06, 2002 at 5:37 PM

yes you can only not buy the magnet cause it depends on magnatism to work but i suggest not to hide it some where else.

-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Print Page | Close Window