Keyless Entry Relays

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42680
Printed Date: May 20, 2025 at 1:57 PM

Topic: Keyless Entry Relays

Posted By: stealth_32
Subject: Keyless Entry Relays
Date Posted: November 10, 2004 at 2:34 PM

Hello, I am working on a '32 ford with shaved door handles and I want to install a keyless entry system so I can open the door with a touch of a button. Does anyone have any ideas on how I can achieve this. I only need to open one door and the trunk. I am thinking that I can use a keyless entry but instead of un-locking the doors it will fire the actuator for the door. Thanks for any input!!!!!!!

Replies:

Posted By: auex
Date Posted: November 10, 2004 at 10:59 PM

All you have to do is wire the unlock to this relay diagram, - trigger is going to be the unlock output and +12V output will go to the solenoid.
posted_image

Same principal for the trunk but using an accessory output from the alarm.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: stealth_32
Date Posted: November 12, 2004 at 6:40 AM

Thanks auex! I was thinking it woould be that way, but now you helped confirm it. THANKS!

Print Page | Close Window