Print Page | Close Window

window module

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44117
Printed Date: July 14, 2025 at 4:22 AM


Topic: window module

Posted By: blochhead
Subject: window module
Date Posted: November 30, 2004 at 7:26 AM

how would you have the window go up when you lock the doors and how would they go down with the trunk release button.  I know I'm going to need a window module but how would I wire it to make it do this??



Replies:

Posted By: customcaraudio
Date Posted: December 13, 2004 at 4:04 AM

you can buy window roll up and down modules. they use the negative out on an alarm to trigger the roll up. and an aux from your alarm to roll them down. dei do them.





Posted By: meh66
Date Posted: December 13, 2004 at 9:09 AM
Crime stopper also make a window module, I think it is a 5601. FGind out what type of window system you have before you hook up the module. I just put one in my 91 max and the install was easy. I used the ground when armed wire to roll the windows up and I used a aux channel to roll them down, just like what customcaraudio said. This max was a little different because it had a type A system and I had to go to each door  and cut the window motor wire and run two pairs from each door back to the unit. I only did the front two windows. You can also look at accessories under car security from 12 volt.

-------------
MEH66
"Car Performance and Mobile Electronic Enthusiats"





Print Page | Close Window