off road light harness

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48163
Printed Date: May 11, 2025 at 9:48 AM

Topic: off road light harness

Posted By: redhondapimp
Subject: off road light harness
Date Posted: January 20, 2005 at 1:41 AM

i currently have a pair of offroad lights attached to my brush guard. I was looking at how they were wired and it looks like it could be installed better. as of now it gets power from my fuse box then goes to a switch and then out to the lights. on the back of the switch the connectors are all black and look like they have too much power going through em. i was wondering if i could use relays and reduce the power that goes to the switch

Replies:

Posted By: hotwaterwizard
Date Posted: January 21, 2005 at 1:27 AM

Run them thru a relay and controll the relay with the switch.

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: January 21, 2005 at 1:49 AM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: redhondapimp
Date Posted: January 24, 2005 at 12:09 PM

thanks for the diagram it helps out alot!

Print Page | Close Window