how many relays ?
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=490
Printed Date: May 05, 2025 at 11:09 AM
Topic: how many relays ?
Posted By: Dan M C.
Subject: how many relays ?
Date Posted: April 27, 2002 at 7:21 PM
Can anyone tell me if it's necessary for every piece of equipement to be trigered ON/OFF by it's individual relay,i'm talking about 7 units:1equalizer,1 active crossover,3 amplifiers,1 cap digital display,1 in dash cap charge indicator,one installer told me that just one relay is enough,can somebody clear this up for me,thank you ,Dan M C.
Replies:
Posted By: Mr_Fusion
Date Posted: April 27, 2002 at 7:38 PM
yes, one relay should be fine...the remote wire barely draws any power but just to be on the safe side I would make sure that you run atleast a 16 gauge wire to the relay.
Posted By: the12volt
Date Posted: April 27, 2002 at 7:39 PM
Hi Dan, if you're talking about supplying current to each remote turn on lead, one relay is all you need. the12volt
Posted By: Dan M C.
Date Posted: April 27, 2002 at 11:17 PM
Hi,it's me Dan ; i would like to thank Mr. Fusion and The 12 Volt for helping in regards to remote turn ON/OFF relay,thanks again !
Posted By: the12volt
Date Posted: April 28, 2002 at 6:46 PM
Hi Dan, you're welcome, glad we could help.
|