Passive starter kill connections

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49190
Printed Date: July 07, 2025 at 5:03 PM

Topic: Passive starter kill connections

Posted By: Mclugnut
Subject: Passive starter kill connections
Date Posted: February 02, 2005 at 9:38 AM

In the diagram below what is the actual connection for Key side of the starter, is this the "S" terminal on the solenoid? Also Motor side of starter is this the connection at the negative side of the solenoid contact disc also known as the "M" terminal, the one that goes into the motor field coil windings?

Thanks!

posted_image

Replies:

Posted By: hotwaterwizard
Date Posted: February 05, 2005 at 3:07 AM

Well as I see it,

you would need Different Relay for the first one.

Cube Relays Generaly handle 30 amps max and would Fry.

I think a FORD Starter Solenoid would handle the Current much better.

The 86 would be the case of the solenoid and the 85 would be the S terminal

30 and 87 would be the Large posts

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Print Page | Close Window