DEI 528T problems

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49713
Printed Date: July 24, 2025 at 10:28 PM

Topic: DEI 528T problems

Posted By: bxscig
Subject: DEI 528T problems
Date Posted: February 09, 2005 at 12:09 PM

Hi, I setup a circuit using a 528T and a few relays to get my sunroof to have one-touch functionality.

I have experienced problems with the 528T releasing too early, meaning before the time i had set it for. Sometimes it is the set time and other it is random.

Basically the yellow/brown connectiosn are not held connected long enough.

I will post a diagram.

Replies:

Posted By: bxscig
Date Posted: February 09, 2005 at 12:21 PM

Posted By: bxscig
Date Posted: February 09, 2005 at 12:23 PM

This is for a Acura TL 03. Bascially, when the switches are pressed it closes a relay that controls the power or ground to the motor for the direction. The reason I dont use a 529T is because of the tilt feature. Using the 529t to the motor will always cause it to tilt.

Print Page | Close Window