03 Camry anti-grind

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50377
Printed Date: May 04, 2024 at 9:05 PM

Topic: 03 Camry anti-grind

Posted By: bbattleson
Subject: 03 Camry anti-grind
Date Posted: February 18, 2005 at 10:43 AM

Hey everyone ...i tried searching but came up with no results.. I put a DEI 562T keyless/Remote start on an 03 Camry 4cyl. auto. The car has no transponder and everything work beautifully except I cant get the anti-grind feature to work. Im guessing it is due to the dual starter wires and i've already tried to relay them putting both keyside wires to 87a, engine side to 30, 87 unused, 85 tapped into 2nd ign, 86 to 12v. Doesnt work.

The starter kill works fine. Any answers are greatly appreciated.

Blake

Replies:

Posted By: auex
Date Posted: February 18, 2005 at 12:09 PM

Yeah, it wouldn't work if you wired 85 and 86 both to +12V. Wire 85 to ground when armed/orange wire main harness and 86 to true ignition.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: bbattleson
Date Posted: February 18, 2005 at 12:15 PM

Thanks Auex....running out to try it. I'll let ya know

Posted By: bbattleson
Date Posted: February 18, 2005 at 12:26 PM

Didnt work. Now I have:

85 - ground when armed

86 - ignition

87a - both start wires (key sides)

30 - both start wires (engine sides)

this didnt work. The car starts with the key but will no longer autostart.

Posted By: 2intrigues
Date Posted: February 18, 2005 at 11:06 PM

Is the starter output from the RS connected to the engine side (30) of the anti-grind relay? If not, that's likely your problem.

Posted By: bbattleson
Date Posted: February 19, 2005 at 12:17 AM

It's not connected to 30. I had it as the input on 85 but that wasnt working. So your saying put all three wires...both engine side start wires and the output from the RS to 30?