Instant bleed this cap ?
Printed From: the12volt.comForum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54040
Printed Date: May 06, 2025 at 5:16 PM
Topic: Instant bleed this cap ?
Posted By: willknot
Subject: Instant bleed this cap ?
Date Posted: April 16, 2005 at 4:47 PM
Hi all, long time lurker, first time poster.
Using this relay setup to allow only a momentary signal to the doorlocks, regardless of how long the wifey holds the button down.
Is there anyway to instantly bleed the cap after the input circuit ("switched" circuit in above diagram) cuts, without adding another relay ?
Was thinking another diode somehow, but all my configurations dead end.
Using this relay setup to allow only a momentary signal to the doorlocks, regardless of how long the wifey holds the button down.
Is there anyway to instantly bleed the cap after the input circuit ("switched" circuit in above diagram) cuts, without adding another relay ?
Was thinking another diode somehow, but all my configurations dead end.
Replies:
Posted By: hotwaterwizard
Date Posted: April 17, 2005 at 5:40 PM