Nitrous oxide wiring

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59298
Printed Date: May 21, 2025 at 3:29 AM

Topic: Nitrous oxide wiring

Posted By: allkiller
Subject: Nitrous oxide wiring
Date Posted: July 12, 2005 at 3:39 PM

Please can you suggest a relay wiring for my nitrous set up, there are two solenoids that have to be switched on after first arming the system, followed by the full open throttle micro switch activation and then the momentary activate switch on the gear stick. any Ideas ??

Replies:

Posted By: one04fx4
Date Posted: July 17, 2005 at 7:49 AM

what year vehicle is it going on. new or old. if is old the best way i have found is to wire two switches. one on the clutch and one on the gas. if it is new they make switches for this to run off the tps switch. all you will have to do is lift the pedal a little and it will shut it off

Print Page | Close Window