power windows

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67506
Printed Date: May 03, 2024 at 7:51 PM

Topic: power windows

Posted By: kyson
Subject: power windows
Date Posted: December 02, 2005 at 5:00 PM

how do i wire a relay to power windows i have 5 wires one is 12 volts 2 go to the motor and have a harness that plugs them in. The other 2 are from the switch that have 12 volts coming off them when the switch is activated. where do i hook these, i need to push 12 volts down one wire of the motor and ground down the other and it needs to alternating from window up to window down.

-------------
Nicolas White

Replies:

Posted By: Hoptup32
Date Posted: December 02, 2005 at 5:41 PM

Here's the relay diagram. You will need this setup for each power window, so you will need four relays for two power windows, and so on.

Print Page | Close Window