JDM Folding Mirrors

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=67743
Printed Date: June 01, 2024 at 11:11 AM

Topic: JDM Folding Mirrors

Posted By: jays_z
Subject: JDM Folding Mirrors
Date Posted: December 05, 2005 at 8:06 PM

Hello guys im prettty new here and im in need of your assistance.I have searched but none of the other questions helped me out. I just installed a set of Jdm folding mirrors on my car, now i want them to work with my alarm. When I arm I want them to close when I disarm I want them to open.here's the problem when i switch to close them the left side is positive and the right side mirror is negative. and when i switch to open them vice versa. what im looking for is relay that puts out both a positive and a negative output. and vice versa.

Replies:

Posted By: infinkc
Date Posted: December 06, 2005 at 7:42 PM

how do you have them wired up? are you using the factory wiring and relays? if so you should be able to tap into the Blue / YELLOW wire to simulate pressing the switch, with only one voltage

-------------
There are 10 types of people in the world, ones that understand binary and ones that dont.

Posted By: jays_z
Date Posted: December 07, 2005 at 8:50 PM

if i did that that i believe only one side will close. I need a negative output for the otherside for it to close