Radio On Til Door Open Problem
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=70616
Printed Date: July 13, 2025 at 5:54 PM
Topic: Radio On Til Door Open Problem
Posted By: x_projectneon_x
Subject: Radio On Til Door Open Problem
Date Posted: January 12, 2006 at 2:34 PM
Hi I attempted the Radio on til door open today but I ran into a problem. I wired everything correctly but iv determined that supposivly the door trigger is - and is color coded RED / white in the drivers kick panel. But after testing it that wire is constantly a ground. I tested this by connecting a meter to a constant 12 volt sorce and the other lead to the supposed trigger wire. I think pushed the button on the door jam to simulate a shut door, 12 volts. I let the button out and got 12 volts. Im assuming that this is the wrong wire? Its a 2005 nissan sentra 1.8s. Any ideas? Thanks in advance. Also when i wired everything up as per the diagram the radio wouldnt shut off if that helps at all.
Replies:
Posted By: x_projectneon_x
Date Posted: January 13, 2006 at 12:48 PM
Im still trying to figure this out and Iv came to the conclusion that the Red White is the signal to the passanger window to go down.
Posted By: mobilecustoms
Date Posted: January 13, 2006 at 1:24 PM
look for a red wire if the car has factory keyless.
Posted By: mobilecustoms
Date Posted: January 13, 2006 at 1:27 PM
sorry disreguard the other post by me.
its red (-) if the car has factory power locks. RED / white is the passenger front door trigger
if the car does not have power locks use the RED / white.
Posted By: x_projectneon_x
Date Posted: January 14, 2006 at 1:03 AM
well i think I found the right wire it is RED / white still just a smaller gauge.. Who would of thought lol thats for the help.
|