wiring up air ride suspension?
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=71524
Printed Date: July 01, 2025 at 8:00 PM
Topic: wiring up air ride suspension?
Posted By: wunlo99nismo
Subject: wiring up air ride suspension?
Date Posted: January 25, 2006 at 11:13 PM
hello everyone, as i stated before i am new to this forum and have a few questions about wiring up my air ride suspension. what i am trying to do is figure out a way to wire my dump valves to my alarm which when armed will automatically trigger the dumps. i am totally new to this and have only wired up relays using a wiring schematic. does anyone have any input? thanks in advance!
Replies:
Posted By: auex
Date Posted: January 26, 2006 at 7:52 PM
Well you would diode isolate the ground when armed wire between the alarm and starter kill. Then you would probably need a timed relay setup to only hold the valves open for 10 seconds tops.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: HottAccord
Date Posted: February 02, 2006 at 8:12 PM
Hmm, thats actually not a bad idea. Someone told me about this when i first got my air suspension for my Accord...
-------------
Im a fiberglass whore!!
Posted By: ondub2s
Date Posted: March 12, 2006 at 2:05 AM
10 seconds might be more then enough what sizee air line/hose are you running my brothers got 1/2 and like 3 seconds would be enough... i wouldent want my valves opne longer then that at a time for some reson
|