neons with alarm

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7502
Printed Date: August 19, 2025 at 5:42 AM

Topic: neons with alarm

Posted By: msf145
Subject: neons with alarm
Date Posted: January 01, 2003 at 6:52 PM

i have a 92 firebird and i want to make it so my under carriage neons flash with my alarm. i have pin 85 tapped into the siren positive output wire. and pin 86 to ground. then on pin 30 i had the postive wire of the neon. on pin 87 i have a postive 12V. so ifigured when the siren wire getthe positive signal the switch will go from 87a to 87 making the lights flash. but when i do this the fuse keeps blowing on the12v wire when i hit the disarm or arm button on my alarm. what am i doing wrong?

thanx

Replies:

Posted By: brianh
Date Posted: January 01, 2003 at 9:32 PM

Is the fuse blowing on the alarm or the neon light? Brian

Posted By: msf145
Date Posted: January 01, 2003 at 10:54 PM

the fuse on the postive wire of the light. its 20amp fuse. couldthe relay be drawgin to much current or soemthing?

Posted By: brianh
Date Posted: January 02, 2003 at 7:19 AM

Sounds like somthing is grounding out downstream from your relay. Check all your wires throughly for naked places. You might even try some flex loom to put over your wires to prtect them from the elements. Good luck, Brian