pop up numberplate
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75601
Printed Date: April 29, 2024 at 2:14 AM
Topic: pop up numberplate
Posted By: kiwistyle
Subject: pop up numberplate
Date Posted: April 03, 2006 at 3:44 AM
i would like to use a motor from a headlight lifter to make my rear numberplate rise up and down. in behind the numberplate i was thinking about mounting a halogen light that came on when the vehicle was put into reverse but am not sure on the wirng of the relays that would be needed.
-------------
johno
Replies:
Posted By: joe_1
Date Posted: April 17, 2006 at 4:31 PM
when the power is droped from when these motors when they are active, do they return on there own? or are they set up with relays to reverse polarity to return?
-------------
i am also a technician so if you have any engine trouble let me know, and i will do my best to help.
Posted By: TAME ITI
Date Posted: May 10, 2006 at 4:39 AM
I have used the motors out of eletronic car heaters for motorising .These are great as they have a ton of torque ,small,queit and dirt cheap.They have built in limit switches .I have motorised licence plates,spot lights etc .. with these and they work like a dream .
|