Simple relay switch

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76899
Printed Date: July 12, 2025 at 3:18 PM

Topic: Simple relay switch

Posted By: hurley1718
Subject: Simple relay switch
Date Posted: April 27, 2006 at 4:40 PM

First off this is an awesome forum.

Second, I am shaving my door handles and I have purchased 45lb actuators. I am installing a simple push button switch on the outside of the SUV to open the actuator if my alarm remote dies. Can someone explain where on the relay I would connect everything.

Thanks.

Replies:

Posted By: hotwaterwizard
Date Posted: April 30, 2006 at 12:18 AM

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hotwaterwizard
Date Posted: April 30, 2006 at 12:27 AM

You could just use a switch instead of adding a relay since the amp draw is less that one amp.

posted_image

-------------
John DeRosa (Hotwaterwizard)
Stockton California
When in doubt, try it out !

Posted By: hurley1718
Date Posted: May 01, 2006 at 12:21 PM

I need to use a very small alarm valet switch and I don't want to burn it up. Thank you very much for the diagram.

Print Page | Close Window