Single Flasher Output
Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79608
Printed Date: May 08, 2024 at 10:14 PM
Topic: Single Flasher Output
Posted By: pauliothegreat
Subject: Single Flasher Output
Date Posted: June 25, 2006 at 2:30 PM
Hey ive been looking at the help pages on this site but i am unsure what setup i need. i have remote central locking kit that has a single flasher output and i wish to wire it to the two indicator wires without bridging the two and making all 4 flash with a left signal, did that :P
also what one off this page do you think i would need:
https://www.maplin.co.uk/Search.aspx?criteria=SPDT&doy=25m6&source=15
Many Thanks, Paul
Replies:
Posted By: pauliothegreat
Date Posted: June 25, 2006 at 4:47 PM
ok i have now read up on the relays and i believe i may have it. one thing i am unsure about thous is if i can use the positive output as the trigger as the tutorial says the negative. i dont see this being a problem but i wanted to check
|