one trigger 2 output

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=80247
Printed Date: May 14, 2025 at 7:34 PM

Topic: one trigger 2 output

Posted By: Matrix7333
Subject: one trigger 2 output
Date Posted: July 13, 2006 at 9:47 AM

hello all, i have installed a remote start in my wife's car and it would crank but not start, i temporarily bridged the second ignition wire to the one output from the remote start and it started.

since the starter only has support for one ignition wire, how can i wire the relay to power both ignition wires during remote start?

thanks

Replies:

Posted By: josh1979
Date Posted: July 13, 2006 at 6:16 PM

what brand and model do you have? all ive seen have at least a neg.trigger second ing. if not

(85) ing. from unit

(86)ground

(87) 12v batt

(30) out too second ing.

-------------
bring back the rotary phone so i dont have to press 1 to proceed in english

Posted By: markcars
Date Posted: July 13, 2006 at 11:21 PM

If the remote start has only one ignition wire to it, maybe you need to use only your second ignition wire to it. Which make/model remote start do you have? That could help us more. Also make/model of car would help as well.

Posted By: Matrix7333
Date Posted: July 15, 2006 at 9:59 AM

thanks much, i just disconnected the first ignition wire and left the second one connected and it started. posted_image

Print Page | Close Window