smart starter kill relay 2005 pathfinder

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=87249
Printed Date: May 09, 2025 at 9:03 PM

Topic: smart starter kill relay 2005 pathfinder

Posted By: nsgguy
Subject: smart starter kill relay 2005 pathfinder
Date Posted: December 15, 2006 at 2:34 PM

need help with this one!! how do i wire this relay for the starter kill on a 2005 nissan pathfinder??

installation sheet says: relay must be diarmed BEFORE ignition switch is turned on, may trigger check engine light, reset by cycling key on/off. aux. power can be connected to any fuse that has power when the ignition is in the off position. part number 6408A

any info is greatly appreciated

-------------
Thank you all

Replies:

Posted By: Big Dog
Date Posted: December 15, 2006 at 2:56 PM

Go to your underhood fusebox on the passenger side.

Locate the start relay. Replace it with the 6408A.

Find a fuse in the same fuse box (any amperage), using a probe or test light, which has 12V pos with the key turned off and the engine not running. Remove that fuse and replace it with the wire with the two prong connector of the 6408A. Put the fuse you removed into the inline fuse holder between the 6408A and the two prong connector.

Program your transmitter as per the instructions which came with the Smart Relay.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: nsgguy
Date Posted: December 16, 2006 at 8:56 AM

thank you

where can i get a 6408a relay

thanks again

-------------
Thank you all