Immobilisers

Printed From: the12volt.com
Forum Name: Relays
Forum Discription: Relay Diagrams, SPDT Relays, SPST Relays, DPDT Relays, Latching Relays, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9043
Printed Date: August 28, 2025 at 12:18 PM

Topic: Immobilisers

Posted By: GilesRice
Subject: Immobilisers
Date Posted: February 04, 2003 at 8:33 AM

Is it possible to use one of the SPDT relays in an immobiliser? My problem is that I know that I have correctly wired in the fuel circuit and ignition and ignition circuit but sometimes the starter motor refuses to catch. Is it a problem with the relay or my wiring? Any suggestions helpful.

-------------
Giles

Replies:

Posted By: securinu
Date Posted: February 05, 2003 at 7:52 PM

you will have to be more specific as to what you did.

Posted By: mpalarm
Date Posted: February 11, 2003 at 11:38 AM

First is necessary to check the starter . This problem looks like problem in the shalter of the starter. In other case check the current handling of the relays in the immo. If it is less than 30 A - use relay with bigger current handling like 30/40A DC , remoted by the immo`s built-in relay for starter interuption.

MPAlarm

-------------
MPAlarm

Print Page | Close Window